Advertisement
Features of Your Touch Control Panel
The touch control panel allows you to set the oven controls
electronically with the touch of a finger. It's designed to be
easy to use and understand.
1. Display. Individual bar light indicators show when the oven
is in any of the functions: Cook 1, Cook 2, Probe or Hold. The
digital numbers will show what power level you have set as
well as the cooking time remaining after the oven starts. The
word "End" will appear when cooking time is completed.
2. Number Pads. Touch these pads to enter microwave
cooking time, food temperature or power level.
3. Cook 1 and Cook 2. Microwave for a preset amount of time
using Power Level 10 or change power level after setting time.
Cook 1 and Cook 2 allow you to program 2-stage cooking at
two different power levels. (See page 10.)
4. Power Level. Touch this pad before entering another power
level number if you want to change from automatic Power
Level 10 (HI) or Power Level 3 (LOW) for defrosting.
5. Ternp Cook. Use the temperature probe to cook with a
preset temperature. You can program any temperature from
100" to 199"F. Zeros as well as 100 are automatic. For setting a
temperature such as 155, you would simply touch the "5" pad
twice. Or for setting a temperature such as 160, you would only
touch "67 (See page 11.)
6. Start. After you program the oven, press the Start pad which
will actually start the cooking cycle as well as the flow of
microwaves into the oven. (ON button must be pressed. )
7. Clear. If you make an error in programming,
simply touch
the Clear pad and start over.
8. On. When you press the On button, the light inside the oven
will come on. You'll hear a slight whirring sound—that's the
air circulation fan that removes excess moisture from the oven.
The control panel will be ready for you to program. The On
button does not start the flow of microwaves into the oven
cavity.
9. Off. When you're finished cooking, press the Off button.
The oven light and fan will shut off.
I
8
Advertisement
