Start-Up And Use; Starting The Appliance; Chiller System; Using The Refrigerator To Its Full Potential - Indesit BAAN 33 P Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

Start-up and use

Starting the appliance

GB
! Before starting the appliance, follow the installation
instructions ( see Installation ).
! Before connecting the appliance, clean the
compartments and accessories well with lukewarm
water and bicarbonate.
! The appliance comes with a motor protection control
system which makes the compressor start approximately
8 minutes after being switched on. The compressor also
starts each time the power supply is cut off whether
voluntarily or involuntarily (blackout).
1. Set the FREEZER OPERATION knob on
2. Insert the plug into the socket and ensure that the
green POWER indicator light illuminates.
3. Turn the REFRIGERATOR OPERATION knob to an
average value. After a few hours you will be able to put
food in the refrigerator.
4. Turn the FREEZER OPERATION knob to an average
value and press the SUPER FREEZE button (rapid
freezing): the SUPER FREEZE indicator light will
illuminate. Once the refrigerator has reached the
optimal temperature, the indicator light goes out and
you can begin food storage.

Chiller system

The appliance comes with one of the chiller systems
described below: take note of your system in order to
determine the most efficient food storage method.
Aircooler
It is recognizable due to the presence of the mechanism
on the top part of the refrigerator compartment ( see
diagram ). The Aircooler maintains a constant fridge
temperature to keep food fresher for longer and will
quickly restore the temperature to the correct level, even
if the door is opened frequently: the blown air (A) is
cooled when it comes into contact with the cold wall,
whereas the hotter air (B) is sucked up ( see diagram ).
The back wall may be covered in frost or droplets of
water, depending on whether the compressor is in
operation or whether it is paused.
18
.
B
A
Static
Models without the Aýrcooler have the cooling section in
the internal back wall of the compartments. The wall will
be covered in frost or water droplets depending on
whether the compressor is operating or paused: both
cases are normal. If the REFRIGERATOR OPERATION
knob has been set on high values with large quantities of
food and with a high ambient temperature, the appliance
can operate continuously, resulting in excessive frost
formation and excessive energy consumption:
compensate for this by shifting the knob towards lower
values (defrosting will occur automatically).
In static appliances, the air circulates in a natural way:
the colder air tends to move downwards as it is heavier.
The food should be stored as follows:
$UUDQJHPHQW LQVLGH WKH
)RRG
UHIULJHUDWRU
Above the fruit and vegetable
Fresh fish and meat
bins
Above the fruit and vegetable
Fresh cheese
bins
Cooked food
On any shelf
Salami, bread loaf,
On any shelf
chocolate
Fruit and vegetables
In the fruit and vegetable bins
Eggs
On the shelf provided
Butter and margarine On the shelf provided
Bottles, drinks, milk
On the shelf provided

Using the refrigerator to its full potential

• Use the REFRIGERATOR OPERATION knob to adjust
the temperature ( see Description ).
• Press the SUPER COOL button (rapid cooling) to lower
the temperature quickly. For example, when you place
a large number of new food items inside a fridge the
internal temperature will rise slightly. The function
quickly cools the groceries by temporarily reducing
the temperature until it reaches the ideal level.
• Place only cold or lukewarm foods in the compartment,
not hot foods ( see Precautions and tips ).
• Remember that cooked foods do not last longer than
raw foods.
• Do not store liquids in open containers. They will
increase humidity in the refrigerator and cause
condensation to form.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ban 34 p

Table of Contents