Table of Contents
Advertisement
Modem Setup (Mac)
Device Recognition (Mac)
With USIM Card installed, insert modem USB plug into Ma USB port. Mac
should automatically recognize modem within approximately 45 seconds.
4
System message appears upon modem recognition. See "Software Installation
(Mac)" to install SoftBank HW Utility.
•
M odem may fail if Mac enters sleep mode, etc. with it connected. Remove
modem before leaving a Mac unattended, etc. Modem may malfunction
if connected before Mac starts/restarts. Remove modem before starting or
restarting Mac.
4-2
Software Installation (Mac)
Installing SoftBank HW Utility
Use this modem to access Network or adjust settings.
All screenshots and procedures based on Mac OS 10.6.
•
I f HW Utility is installed to Mac other than for this modem, uninstall it according
to instructions provided with it.
•
D o not remove modem during installation. May cause installation failure, system
malfunction or other system errors.
a .Power.on.Mac.and.initiate.Mac
b .. I nsert.modem.into.Mac.
If icon appears on desktop, double click it. " SoftBank UTILITY" folder opens
automatically
c .. D ouble.click."SoftBank.HW.Utility".to.start.installation.and.display.
below.window..Click."Continue"
.
Advertisement
Table of Contents
