Hyundai I20 Owner's Manual page 348

AUTOMATIC TRANSAXLE FLUID (IF EQUIPPED)
G100100APB
Checking the automatic transaxle
fluid level
The automatic transaxle fluid level
should be checked regularly.
Keep the vehicle on the level ground with
the parking brake applied and check the
fluid level according to the following pro-
cedure.
1. Place the shift lever in N (Neutral)
position and confirm the engine is run-
ning at normal idle speed.
2. After the transaxle is warmed up suffi-
ciently (fluid temperature 70~80°C
(158~176°F), for example by 10 min-
utes usual driving, move the shift lever
through all the positions then place the
shift lever in "N (Neutral) or P (Park)"
position.
OPB079008
Maintenance
3. Confirm that the fluid level is in "HOT"
range on the level gauge. If the fluid
level is lower, add the specified fluid in
the fill hole. If the fluid level is higher,
drain the fluid from the drain hole.
4. If the fluid level is checked in cold con-
dition (fluid temperature 20~30°C
(68~86°F) add the fluid to "C" (COLD)
line and then recheck the fluid level
according to the above step 2.
OHD076045N
7 35