Brewing Coffee - Philips Senseo HD7832 Owner's Manual

8 Put a bowl (with a capacity of at least 1.6 qt./ 1.5 litres) under the
spout openings to collect the water. )
9 Press the on/off button 3.
After pressing the on/off button 3, the display lights up for a moment and
the light rings around the 1-cup button q and the 2-cup button qq/
burn continuously.
10 Press the 1-cup button q AND the 2-cup button qq/
the same time.
The boiler fills itself with water from the water reservoir. This may
,
take some time (approx. 90 to 150 seconds). The machine switches
off automatically when the flushing cycle ends. During the flushing
cycle the machine produces more noise than during a regular
brewing cycle.
Never interrupt the flushing cycle halfway. If you do, the boiler will not
fill itself properly.
Note: Before you use the machine for the first time, clean the coffee spout, the
coffee collector and the pod holders with hot water and some dish soap or in
the dishwasher. Clean the water reservoir thoroughly in hot water, if necessary
with some dish soap.
Now your Philips SENSEO

Brewing coffee

1 Fill the water reservoir with cold water up to the MAX indication
and put it back onto the machine.
Never pour milk, coffee, hot water or carbonated water into the water
reservoir.
- q MIN: minimum amount of water required to brew one cup of
SENSEO coffee.
\
w
- MIN: minimum amount of water required to brew 2 cups or
qq/
1 mug of SENSEO
- A full reservoir allows you to make 6 large cups h, 8 medium cups g
or 10 small cups f of SENSEO
fill the water reservoir each time you want to make a cup of coffee.
coffee machine is ready for use.
\
coffee.
\
coffee. This makes it unnecessary to
\
9
w
w
briefly at