Philips Senseo HD7832 Owner's Manual page 10

10
2 Press the on/off button 3.
The indicator light blinks slowly and the display shows the heat-up
,
indication D while the water is heating up. Heating up takes approx.
90 seconds.
The coffee machine is ready for use when the indicator light burns
,
continuously and the light rings around the 1- cup button q and the
2-cup button qq/
If the indicator light blinks rapidly and the display shows the water
,
refill indication s, the water reservoir does not contain enough
water for brewing one cup of coffee.
If there is not enough water for brewing two cups of coffee, the light
,
ring around the 2-cup button qq/
cannot be operated.
3 Release the lid by moving the lever upwards.
 Open the lid.
5 Place the appropriate pod holder in the machine.
Note: Make sure the pod holder is clean and the sieve in the centre is not
clogged, e.g. with loose coffee grounds.
If you want to make one cup of SENSEO
,
combination with the 1-cup pod holder q and the 1-cup button q.
,
w
go on.
w
will not go on and this button
coffee, use 1 coffee pod in
\