Https Communication Protocol - ABB 800xA User Manual

Section 3 Configuration
AOWebServerNode.
host name for the communicating with the Provider Asset Optimization Server. It is
possible to use the IP address of AOWebServerNode for communication instead of
the host name.
To change the host name or IP address settings:
1.
2.
Figure 42. Changing the IP address
3.
This configuration change does not require an upload of objects.

HTTPS Communication Protocol

This section describes the steps to be performed when using HTTPS as the
Communication Protocol.
Secure Socket Layer (SSL) Certificates
The Asset Optimization data communication between the subscriber and provider
system is secured and encrypted using the SSL Certificate. The SSL certificate must
be installed and configured on the AOWebServerNode in the Provider system.
The following are the requirements for the SSL Certificate:
1.
2.
3BSE037076-510 D
The default configuration is to use the AOWebServerNode
Go to the Config View of the Asset Optimization Configuration aspect and
select IP.
Enter the IP address of the AOWebServerNode.
Click Apply to save the settings.
The Common Name (CN) must be the host name of the AOWebServerNode.
The recommended validity of the certificate is up to 4 years.
HTTPS Communication Protocol
67