Vespa PX 125 150 Euro 2
Refitting the flywheel magneto
− Refit the components following above opera-
tions in the reverse order.
− After refitting the flywheel, apply grease on the
thread.
Recommended products
AGIP GREASE PV2 Grease for steering bear-
ings, bolt seatings for swinging arms and fay-
ing surface of driven pulley spring (only pulley
side)
Soap-based lithium and zinc oxide grease con-
taining NLGI 2; ISO-L-XBCIB2
Locking torques (N*m)
Flywheel fixing nut
60 ÷ 65
Cylinder assy. and timing system
Removing the cylinder head
− Loosen the four nuts and remove the cylinder
head.
Removing the cylinder - piston assy.
After removing the cylinder detach the wrist pin re-
taining rings and hence remove the piston.
Engine
ENG - 57