Auto Timer (Rdg100T, Rdg100T/H, Rdg160T - Siemens RDG100 Basic Documentation

Installation notes
Buttons of the
RDG100T/H
Setting the time of day
and the weekday
12-hour and 24-hour
format
Note
Siemens
Building Technologies
For inputs X1, X2, or D1, one physical switch can be used for up to 20 thermostats
(parallel connection).
Caution! DO NOT mix X1/X2 (mains potential) and D1.
For sensors on inputs X1, X2, or D1, the cable length is max. 80 m.
4.11 Auto timer (RDG100T, RDG100T/H,
RDG160T.. only)
The thermostat provides an Auto Timer mode with 8 programmable timers.
Each timer can be assigned to one or several days. In this mode, the thermostat
automatically changes over between Comfort and Economy mode according to the
preprogrammed timers.
Button = bottom, button
1. Press the program mode button to enter the programming mode menu.
2. Press button (OK) to enter the setting mode for the time of day.
The time digits start blinking.
3. Turn the rotary knob clock- or counterclockwise to set the time of day.
If the current time of day is in 24-hour format and you wish to change it to 12-hour
format, turn the knob clockwise passed 23:59 or counterclockwise passed 00:00.
If the current time of day is in 12-hour format and you wish to change it to 24-hour
format, turn the knob clockwise passed 12:00 pm or counterclockwise passed 12:00
am.
4. Confirm the time of day by pressing the right button
The weekday indicator starts blinking.
5. Turn the rotary knob clock- or counterclockwise to set the current weekday.
6. Confirm the current weekday by pressing button
7. Press the program mode button
RDG100T..: Time and weekday are always visible on the display, even when auto
timer is OFF (P02 = 3 or 4).
RDG160T..: Time and weekday are NOT visible on the display when auto timer is
disabled, either by setting P02 to 3, 4 or DIP5 to ON.
RDG100.., RDG110.., RDG160T.. Basic Documentation
Functions
= top (see operating instructions B3181.4).
(Esc) to leave the program mode.
(OK).
CE1P3181en
2015-07-29
49/81