Initial System Setup - LG BH5140S Service Manual

When you turn on the unit for the fi rst time, the initial setup wizard appears on the screen.
Set the display language and network settings on the initial setup wizard.
1. Press (POWER).
The initial setup wizard appears on the screen.
2. Use / / / to select a display language and
press ENTER ( ).
3. Read and prepare the preparations for the net-
work settings and then press ENTER ( ) while
[Start] is highlighted.
If wired network is connected, the network
connection setting will automatically be fi nished.
4. Select [Next] and press ENTER ( ).
5. Press ENTER ( ) to verify the test tone signals
of the speakers.

INITIAL SYSTEM SETUP

1-5
5. After verifying the test tone signals, press ENTER
( ) while [Stop] is highlighted. Select [Next] and
press ENTER ( ).
6. You can listen to TV sound through HTS speaker
automatically when TV is turned on. TV and HTS
should be connected with optical cable.
Press to move and press
[Off]. Select [Next] and press ENTER ( ).
7. Check all the settings that you have set in the
previous steps.
Press ENTER ( ) while [Finish] is highlighted to
fi nish the initial setup settings. If there is any
settings to be changed, use
1
select and press ENTER ( ).
8. Displays private sound mode guide.
Press ENTER ( ).
/ to select [On] or
/ / / to