LG BH5140S Service Manual page 48

2. NO BOOTING WHEN YOU TURN THE UNIT ON, NO MESSAGE OR
"PLEASE WAIT" ON FRONT PANEL
When you turn on your set, it will "PLEASE WAIT" display on front panel, and it will not boot-up
normally.
2-5. X501
2-5-1. Solution
Replace X501 on MAIN board.
2-5-2. How to troubleshoot (Countermeasure)
1) Please check the soldering status of 27 MHz crystal (X501).
2) Please check the frequency of 27 MHz crystal (X501).
3) If the crystal doesn't oscillate, replace X501.
4) After changing it, if the set is still not booting :
- Check NAND Flash IC (IC504) refer to item 2-6.
- Check DDR IC (IC502, IC503) refer to item 2-7.
- Check MT8560 IC (IC501) refer to item 2-8.
2-5-3. Service hint (Any picture / Remark)
X501
ONE POINT REPAIR GUIDE
< Main board top view >
2-33