Using This Manual - Sony KP-51WS510 Service Manual

Color rear video projection
Hide thumbs Also See for KP-51WS510:
Table of Contents

Advertisement

Using this manual

Wide Screen Mode: Allows you to watch 4:3 normal broadcasts in
wide screen mode (16:9 aspect ratio).
Auto Wide: Allows you to select the wide screen mode automatically.
Flash Focus
: Allows you to adjust convergence automatically.
Manual Convergence: Allows you to manually adjust the convergence
of specific areas of the screen.
Digital Visual Interface (DVI): Can accommodate a copyprotected
digital connection (HDCP
boxes) that have compatible interfaces. The DVI-HDTV input terminal
is compliant with the EIA-861 standard and is not intended for use with
personal computers.
We recommend that you carefully review the contents of the following three
sections in the order shown to ensure that you fully understand the operation
of your new projection TV.
1
Installing and Connecting the Projection TV
This section guides you through your initial setup. It shows you how to
install your projection TV, to connect your new components and to connect
the antenna and cable.
2
Using the Features
This section shows you how to begin using your new projection TV. It also
shows you how to use your remote control functions.
3
Using the menus
This section teaches you how to access on-screen menus and adjust your
projection TV settings.
Instructions in this manual are written for the remote control. Similar
controls are also found on the projection TV console.
* High-bandwidth Digital Content Protection
Introducing the Sony Projection TV
*
) to other devices (such as digital set-top
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kp-57ws510Ra-6aKp-65ws510

Table of Contents