Tuning to radio stations
1
Press POWER to on, then press then press
CD/AM/FM once or more to select radio
source (AM or FM)
or
On the remote control, press POWER to on,
then press RADIO once or more to select your
waveband: FM or AM
➜ Display shows: RADIO, radio station
frequency and waveband
2
∞
Press and hold
the display starts running
➜
The radio automatically tunes to a station of
sufficient reception
3
Repeat step 2 if necessary until you find the
desired radio station
● To tune to a weak station, press
and repeatedly until optimal reception is found
To improve radio reception
● For FM, extend and adjust the AC power cord
14
§
/
until the frequency in
∞
§
/
briefly
Storing preset radio stations
You can store up to 25 preset radio stations in
the memory (15 FM and 10 AM).
Manual programming
1
Tune to your desired radio station (see Tuning
to radio stations)
2
Press PROG to store the station
➜
Display shows its preset number. PROG
flashes
3
Press PROG to confirm
➜
PROGdisappears
Helpful hints:
– If you store more than 15 FM stations or 10
AM stations, the new station will replace the 1st
preset station.
To listen to a preset station
●
Use the Numeric Keypad (1-5) on the set
to select the desired preset station (1-5)
or
Press TUNING/PRESET 3/ 4 buttons
once or more until the desired preset station is
displayed
➜ Display shows the preset number briefly.
Radio