Programming Tracks; Erasing The Program - Philips AJ6110 User Manual

CD

Programming tracks

You may store up to 20 tracks in the desired
sequence. If you like, store any track more than
once.
1
In the stop position, press PROG to start
programming
➜
Display shows 01 indicating the start of the
program. PROG and current track number flash
2
Press 4 / ¢ once or repeatedly until the
desired track number appears in the display
3
Press PROG to store the desired track.
➜
Display shows 02 (up to 20 in sequence),
indicating the next program location available.
PROG and current track number flash
4
Repeat steps 2-3 to select and store all desired
tracks.
➜ FULL is displayed if you attempt to program
more than 20 tracks
5
Press ÉÅ play the program

Erasing the program

You can erase the contents of the memory by:
● Press 9
– once if in the stop position;
– twice during playback
●
Open the CD door
13