Signal Type - Haier LT19Z6 Service Manual

3.5 Signal Type

3.5.1 TV Signal Input:
RF Signal:
Video signal: Composite (CVBS input) / 1Vpp (300mV-sync, 700mV-video.)
Audio signal: R/L input
Level:- Nominal: 0.5 V rms.
R/L output Level:
HDMI signal : Digital interface with 4 channels TMDS signal
HDMI support both AV type and PC DVI.
3.5.2 TV signal output:
Video: SCART CVBS output (RF out) / 1Vpp (300mV-sync, 700mV-video.)
SCART CVBS output (Monitor out) / 1Vpp (300mV-sync, 700mV-video.)
<< Only for 32"/37"/42" >>
AV CVBS output (Monitor out) / 1Vpp (300mV-sync, 700mV-video.)
<<Only for 19"/22"/26">>
Audio: R/L output
Level:
Aerial input / 10mV(80dBuV)
S video input / 1VppY-signal, 700mVpp C-signal.
*[S-Video signal is attached to SCART connector, no separate I/O connector]
Component Video (YPbPr input)/ 1Vpp Y signal, 700mVpp Pb, Pr signal
SCART input .
*(Full scart has CVBS/RGB/S-video. Half scart has CBVS/S-video signal [Half
SCART is not equiped for 19", 22"and 26"])
- Maximum : 2.0 V rms.
- Impedance > 10 k Ω.
- Nominal : 0.5 V rms.
- Maximum : 2.0 V rms.
- Nominal: 0.5 V rms.
-Maximum: 2.0 V rms.
SCART/AV content output(CVBS type) condition table
29