Running The Quick Start Program - Secure Computing sidewinder Startup Manual

Appendix A: Other Quick Start Methods
Using a locally attached terminal
36

Running the Quick Start program

Once the appliance finishes powering on and the systems are connected, a
welcome message appears on the terminal. To run the Quick Start program, do
the following:
1 Press
. The license agreement appears.
Enter
2 Answer each question as it appears, using the information you gathered in
"Preparing your Quick Start Wizard responses" on page 8. If you need more
information about a question, type
3 While the
appliance
Go to a Windows-based computer installed with the Sidewinder Management
Tools to begin managing your
Tip: For more information, see Chapter 3, Setting Up the Management Tools, and
Chapter 5, Managing your Sidewinder Appliance.
and press
?
reboots, disconnect the terminal cable.
.
appliance
.
Enter