Secure Computing sidewinder Startup Manual page 18

Chapter 1: Installation Overview
Checklist for success
3
4
6
Configure your Sidewinder appliance
Set up the hardware by doing the following:
a Make sure the security appliance is properly situated in your
network.
b Connect the power cord and the network cables.
c Power on the Sidewinder appliance.
d Connect a serial cable from the appliance to the Windows-based
computer installed with the Sidewinder Management Tools.
See page 20 for more information.
Start the Quick Start Wizard. See page 20 for more information.
After the Quick Start Wizard completes, detach the serial cable.
Start managing your Sidewinder appliance
Start the Admin Console from your Windows-based management
workstation and connect to your appliance. See page 26 for details.
Check for recently released patches:
www.securecomputing.com/goto/updates
Read the section titled "Performing other post-startup tasks" on page
31. It lists tasks that serve as a good starting point for implementing
your policy. Complete details are provided in the Sidewinder
Administration Guide.