Disassembling The Fridge Doors (Rf24J* Only) - Samsung RF32FMQDBSR/AA Service Manual

DISASSEMBLY AND REASSEMBLY

3-3. Disassembling the Fridge Doors (RF24J* only)

How To Do
1. Remove the 6 screws fixing the Top Table.
2. Open the right door of the fridge compartment
so that it does not interfere with the Bracket (②)
and the Top Table.
Lift the back side of the Top Table and pull it to
the front to disassemble.
3. Separate the 2 housing connectors (②) from the
hinge at the top left of the fridge compartment
door and the 1 housing connector (②-1) from
the hinge at the top right of the door.
To separate the housing connectors more easily,
pull the connector while holding down the fixing
hook (③).
Make sure to unplug the power cord
before performing the procedures
above.
Caution
[Note] The number of housing units may differ
depending on the model.
4. As shown in the picture, Remove the water
tube from hinge by holding at the both sides of
the Tube Fitting (④) and pulling it out. After that,
remove the Tube Fitting by pulling the water
hose after pushing in the locking ring (⑤).
[Note] For Dispenser model only
5. Push the Pusher (⑦) in the direction of the
arrow at the right hinge to disassemble.
Descriptive Picture
2 2
3 3
26
2-1 2-1