Seiko M-6 Instructions Manual page 82

Wind the mainspring and reset the time. While wearing the watch or before taking
it off , check the power reserve indicator, and wind the mainspring if necessary.
Wear the watch for a longer time. Before removing the watch from your wrist, observe the power reserve indicator to make sure
that the watch has enough power stored to keep running until the next time you wear it. If necessary, wind the mainspring.
Normal accuracy will resume when the watch is kept away from close contact with the magnetic source.
If this condition persists, consult the retailer from whom the watch was purchased.
The normal accuracy will not resume. Consult the retailer from whom the watch was purchased.
Consult the retailer from whom the watch was purchased.
Consult the retailer from whom the watch was purchased.
Advance the hands by 12 hours and reset the date and day.
Solution 参照ページ
How to use
the automatic
mechanical watch
P54
How to set the time
P59
─
─
─
How to set the time,
day and date
P58
81
4