How To Use The Automatic Mechanical Watch - Seiko M-6 Instructions Manual

How to use the automatic mechanical watch

1
1 1
This is an automatic mechanical watch with manual winding mechanism.
2 2
When the watch is worn on the wrist, the mainspring is wound
automatically through normal wrist movement.
The watch can also be wound up by turning the crown. To do so,
unscrew the crown by turning it counterclockwise.
3 3
To start the watch after it stops completely, wind it up either by turning
the crown or swinging it from side to side until the second hand starts
moving. Then, set the time and date before putting the watch on the
wrist.
To wind up the watch, unscrew the crown by turning it counterclockwise,
and then, turn it clockwise slowly. The watch cannot be wound by turning
the crown counterclockwise.
4 4
In the case of a model with the power reserve indicator, wind up the
watch until the power reserve indicator shows a full-wound state. The
watch is wound up fully. (Turning the crown further will not break the
spring) Once the watch is wound up fully, it operates for about 45 hours.
※ To check the winding state of the mainspring, refer to "How to read the power reserve indicator " on
page 56.
54