Renault SCENIC Driver's Handbook Manual page 167

LANE DEPARTURE WARNING
2
Adjustment
Vehicles not fitted with the "Lane
keeping assist" function
From the multifunction screen 2, select
"Vehicle", "Driving assistance", "Lane
departure warning setting".
– "VOLUME": adjust the volume of the
warning;
– "Intensity": adjust the level of steer-
ing wheel vibration;
(3/4)
– "Sensitivity": adjust the sensitivity
level for line detection. To do this,
select:
– "Low": line detected when cross-
ing;
– "Average": line detected on ap-
proach;
– "high": line detected nearby.
Vehicles fitted with the "Lane keep-
ing assist" function:
From the multifunction screen 2,
select "Vehicle", "Driving assistance",
"SETTINGS".
– "VOLUME": adjust the volume of the
warning;
– "Intensity": adjust the level of steer-
ing wheel vibration;
– "Sensitivity": adjust the sensitivity
level for line detection. To do this,
select:
– "Low": line detected when cross-
ing;
– "Average": line detected on ap-
proach;
– "high": line detected nearby.
Operating faults
In the event of a malfunction, the left
and right line indicators or, depending

on the vehicle, the warning light
disappear or stay grey on the instru-
ment panel. In some cases, they are
accompanied by the message "Lane
departure warning check" or the
warning light on the instrument panel.
Consult an approved dealer.
©
2.49