Renault SCENIC Driver's Handbook Manual page 129

FUNCTION STOP AND START
Special feature of the automatic
engine re-start
Under certain conditions, the engine
can restart on its own in order to guar-
antee your safety and comfort.
This can occur especially when:
– the outdoor temperature is too low or
too high (less than around 0 °C or
higher than around 30 °C);
– the "Clear View" function is activated
(please see "Automatic climate con-
trol" in Section 3);
– the battery is not sufficiently charged;
– the vehicle speed is above 3 mph
(5 km/h) (downhill slope, etc.);
– repeated pressing on the brake
pedal or braking system require-
ment;
– ...
Special feature of vehicles with
a key: for some of these condi-
tions the automatic restarting of the
engine is inhibited if a front door is
open.
(4/4)
1
2
Deactivating, activating the
function
Press switch 1 to deactivate the func-
tion. The message "Stop & Start deac-
tivated" will appear on the instrument
panel and the integrated warning light 2
on the switch will light up.
Pressing again will reactivate the
system. The message "Stop & Start ac-
tivated" will appear on the instrument
panel and the integrated warning light 2
on switch 1 will go out.
Special note: with the engine on
standby, press switch 1 to automati-
cally restart the engine.
The system is automatically reacti-
vated each time the vehicle is started
(see "Starting, stopping the engine" in
Section 2).
Operating faults
When the message "Check Stop &
Start" appears on the instrument panel
and the integrated warning light 2 lights
up on the switch 1, the system is deac-
tivated.
Please consult an authorised dealer.
Before leaving the vehicle,
the engine must be stopped
and not put on standby
(please see the information
on "Starting, stopping the engine").
2.11