Philips BM90 User Manual page 13

To enjoy music through the speaker
wirelessly, you need to pair your Bluetooth
enabled device with the unit.
1
/PAIRING to select Bluetooth
Press
source.
» [BT] is displayed.
» The LED indicator flashes blue.
2
On your device that supports Advanced
Audio Distribution Profile (A2DP), enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3
Select 'Philips BM90 xxx' on your
Bluetooth enabled device and if necessary
input '0000' as the pairing password.
» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the unit beeps.
4
Play music on the connected device.
» Music streams from your Bluetooth
enabled device to this unit.
• If you fail to search for 'Philips
BM90 xxx' or cannot pair with this
unit, press and hold
for three seconds until you hear a
beep sound to enter pairing mode.
To disconnect the current
Bluetooth-enabled device:
• Deactivate Bluetooth on your device.
To connect a new Bluetooth-enabled device:
• If there is only one device connected, press
and hold PAIRING for 3 seconds to
enter pairing mode.
• If there are two devices connected, press
and hold PAIRING for 3 seconds to
disconnect the device that is not playing,
and then enter pairing mode.
Philips BM90 XXX
/PAIRING
EN
11