Philips BM90 User Manual page 14

Listen to the radio
Tip
•
Position the antenna as far as possible from TV or other
radiation sources.
•
Make sure that you have connected the supplied FM
antenna.
•
For optimal reception, fully extend and adjust the
position of the antenna.
Tune to a radio station
1
Press FM to select tuner source.
2
Press and hold
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune additional stations.
To fine tune a weak station:
• Press / repeatedly until you find
optimal reception.
Store FM radio stations automatically
Note
•
You can store a maximum of 30 preset radio stations
(FM).
1
In tuner mode, press PROG/CLOCK
SET for 2 seconds to activate automatic
programming.
» [AUTO SRCH] is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
» The first programmed radio station is
broadcast automatically.
2
Press ALBUM/PRESET
preset station.
Store FM radio stations manually
1
Tune to an FM radio station.
EN
12
/ for 3 seconds.
/
to select a
2
Press PROG/CLOCK SET to activate
programming mode.
» [PROG] blinks.
3
Press ALBUM/PRESET
to select a radio frequency.
4
Press PROG/CLOCK SET again to
confirm.
» The frequency of the preset station is
displayed.
5
Repeat the above steps to store more FM
stations.
Note
•
To remove a pre-stored station, store another station
in its place.
Select a preset radio station
• In FM mode, press ALBUM/PRESET
to select a preset radio station.
Show RDS information
RDS (Radio Data System) is a
service that allows FM stations to
show additional information.
1
Tune to an RDS station.
2
Press DISPLAY/RDS repeatedly to scroll
through the following information (if
available):
» Program service
» Program type such as [NEWS],
[SPORT], [POP M]...
» Radio text message
Select stereo/mono broadcast
Note
•
Stereo broadcast is the default setting for tuner mode.
•
For stations with weak signals: to improve the
reception, change to monaural sound.
• In FM tuner mode, press
between mono and stereo broadcast.
» [STEREO] is displayed when the radio
station is stereo broadcast.
/ repeatedly
/
to switch