Battery Removal & 3G/4G SIM Card Insertion
If you do need to remove the battery for any reason (e.g. long term storage) see be-
low. In addition you will need to remove the battery in order to insert the USIM card
(for Model A computers only).
1.
Turn the computer off, and turn it over.
2.
Slide the latch
in the direction of the arrow.
1
3.
Slide the latch
in the direction of the arrow and the battery will pop up to be
2
released.
4.
Lift the battery up from the groove at point
3
2
.
3
1
Battery Removal & 3G/4G SIM Card Insertion 1 - 27
Quick Start Guide
Warranty Warning
Please check with your
service
representative
before undertaking any
upgrade procedures to
find out if this will VOID
your warranty.
Figure 1 - 17
Battery Removal
1
Need help?
Do you have a question about the SKY4XE 2 and is the answer not in the manual?