Panasonic FZ-Q2 Operating Instructions Manual page 9

NOTE
Panasonic PC Settings Utility
l Î
You can check the status of the computer, and change the settings. Touch [Panasonic PC Set-
tings Utility] on the desktop to start the utility.
(Î Operating Instructions - Reference Manual "Panasonic PC Settings Utility")
l PC Information Viewer
Î
This computer periodically records the management information of the fl ash memory, etc. The
maximum data volume for each record is 1024 bytes.
This information is only used for estimating the cause when the fl ash memory goes down by
any possibility. They are never sent to outside via network nor used for any other purpose
except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for man-
agement information history] in [Hard Disk Status] of PC Information Viewer, and touch [OK].
Then follow the on-screen instructions.
(Î Operating Instructions - Reference Manual "Checking the Computer's Usage Status")
5 Update the on-screen manual
A Connect to the internet.
Log on to Windows as an administrator.
For further information, refer to
Connect to a network.
B Update the on-screen manual.
Touch (Start) - [Panasonic] - [Panasonic PC Settings
Utility], and then touch [Support] - [Manual] - [Launch
Manual Selector].
Touch [Manual Selector] on the desktop.
Follow the on-screen instructions.
6 Create the recovery disc.
A recovery disc allows you to install OS and restore its factory
default condition, in case, for example, the recovery partition
of the fl ash memory is damaged. We recommend creating a
recovery disc before you begin using the computer.
Refer to Î
Operating Instructions - Reference Manual
"Recovery Disc Creation Utility" about creating the disc.
l To create a recovery disc for Windows 10, visit the follow-
Î
ing URL and then download data.
l To change to TPM 2.0, refer to the guidance of the follow-
Î
ing URL.
http://pc-dl.panasonic.co.jp/itn/support/recv/
Sign in /
Operating Instructions -
9