Panasonic FZ-Q2 Operating Instructions Manual page 25

nÎStarting Up
Cannot resume.
Other startup problems.
nÎEntering Password
Even after entering the pass-
word, password input screen
is displayed again.
lÎ One of the following operations may have been carried out. Press
the power switch to turn on the computer. Data not saved will be
lost.
• In sleep mode, the AC adaptor was disconnected, or a periph-
eral was connected or disconnected.
• The power switch was pressed for four seconds or longer to
forcibly turn off the computer.
lÎ An error may occur when the computer automatically enters the
sleep or hibernation mode while the screensaver is active. In
this case, turn off the screensaver or change the pattern of the
screensaver.
lÎ Start the Setup Utility (Î
Manual "Setup Utility") to return the Setup Utility settings (excluding
the passwords) to the default values. Start the Setup Utility and
make the settings again.
lÎ Remove all peripheral devices.
lÎ Check to see if there was a disk error.
A Remove all peripheral devices including an external display.
B
1. Long touch
Explorer].
1. Touch (Start) - [Computer].
C
1. Long touch [Windows (C:)], and touch [Properties].
1. Long touch [Local Disk (C:)], and touch [Properties].
D
1. Touch [Tools] - [Check].
1. Touch [Tools] - [Check Now...].
• A standard user needs to enter an administrator password.
E Follow the on-screen instructions.
lÎ
Start the computer in Safe Mode and check the error details.
When the [Panasonic] boot screen disappears
F8
and hold until the Windows Advanced Options Menu is dis-
played. Select the Safe Mode and press
When [Password on boot] is set to [Enabled] in the [Security] menu of
*1
the Setup Utility, [Enter Password] appears after the [Panasonic] boot
screen disappears. As soon as you enter the password and press
Enter
, press and hold
<Only if the external keyboard is connected>
lÎ The computer may be in ten-key mode.
If the NumLk indicator
ten-key mode, and then input.
lÎ The computer may be in Caps Lock mode.
If the Caps Lock indicator
able the Caps Lock mode, and then input.
Operating Instructions - Reference
(Start) at the lower left, and then touch [File
Enter
F8
.
NumLk
lights, press
Caps Lock
lights, press
*1
at startup, press
.
to disable the
to dis-
25