Lincoln MKZ 2017 Owner's Manual page 410

To install the update in your vehicle, remove
anything that is plugged in the USB ports on
the media hub and plug in the USB drive
containing the update. When the USB drive
is plugged in, the installation should begin
immediately. After a successful installation,
the update is available the next time the
vehicle is started.
Please reference the website for any further
actions.
Updating Over Wi-Fi
To update your System over Wi-Fi your
vehicle must be within the range of a Wi-Fi
access point. Data rates may apply.
MKZ (CC9) Canada/United States of America, enUSA, Edition date: 201602, Second Printing
SYNC 3
To connect your system to Wi-Fi, select:
Menu Item
Settings
Wi-Fi
Available Wi- You can then select your Wi-
Fi Networks Fi network. You may have
to enter the security code if
the network is secured. The
system confirms when it has
connected to the network.
You must also give the system permission
to update automatically. Upon vehicle
delivery, the System asks you if you would
like to use the automatic update feature. If
you agree to automatic updates, you can
press OK to confirm. If this selection does
not appear upon vehicle delivery you can
access it through the General Settings. See
Settings (page 460). You can also perform a
master reset. See SYNC 3 Troubleshooting
(page 476).
407
If you would like to switch this feature on
later, select:
Menu Item
Settings
General
Automatic From this menu, you can
System enable automatic updates.
Updates If you have not done so
already, the system prompts
you to set up a Wi-Fi
connection when you
enable this feature.
When Wi-Fi and automatic updates are
enabled, your system checks for software
updates periodically. If a new version is
available, it downloads at that time. Software
downloads can take place for up to 30
minutes after you have switched your vehicle
off. The updates do not interrupt the normal
use of your SYNC 3 system. If a download
does not complete for any reason, the