Troubleshooting; Specifications - DeWalt DWV009 Instruction Manual

Troubleshooting

PROBLEM SOLUTION
Motor does not run Check power cord, plugs and outlet.
Ensure the on/off switch is in the ON
position ( ).
Suction capacity Remove blockages in the suction nozzle,
decreases suction tube, suction hose or filter.
Replace the paper or fleece bag.
Check for proper installation of the filter.
Clean or replace the filter.
Empty canister, refer to Empty Canister
under Operation.
Vacuum stops running Thermal overload has been tripped:
1. Turn the vacuum off and disconnect
vacuum cleaner from power source.
2. Empty the canister, if needed.
3. Allow the unit to cool.
4. Plug the power cord into an appropriate
outlet and turn on/off switch to the ON
position ( ) to test.
Dust comes out while Check for proper installation of the filter.
vacuuming.
Ensure filter is not damaged; replace if
necessary.
Ensure filter seal is in place and is secure.
Power tool does not Ensure tool is plugged into the tool outlet
turn on. on the dust extractor.
Ensure the on/off switch is in the ON
position ( ).
Page dimensions: 5.8 x 8.3 inches Page dimensions: 5.8 x 8.3 inches

SPECIFICATIONS

AR
Volts 220V
Hertz 50hz
Nominal Motor
Current
Capacity
Weight
32
B2 B3 BR
220V 120V 127V
50-60Hz 50-60Hz 60Hz
1400 W
8 gallon (30.2 liters)
21 lbs. (9.5 kg)