Conference Call; In-Call Symbols - Philips Xenium 929 Owner's Manual

Conference Call

The user can activate the conference call by making consecutive outgoing calls, or create it
from a multiparty call context. The user may have up to five members at the same time. He can
endd the conference with
When making consecutive outgoing calls, first initiate a normal call with the first number of the
conference. Then when the first member is on line, initiate a second call as described in making
a second call paragraph page 47.
When the second call is engaged, press the Pilot Key and select
process up to five members.
If there is an incoming call during the conference call, and if there is less than the five members,
by pressing the Pilot key :
You can accept the second call as described in paragraph answering a second call page 47, and
by pressing the Pilot key and selecting
call.
If there is an incoming call during a conference and if five members are already connected, the
incoming call is automatically rejected with a user Busy notification (there is no ringing screen).

In-call symbols

During calls, you have the following symbols:
. At this point all calls are disconnected.
Conference
Mute
Call underway
Active call placed on
hold
Incoming call
Outgoing call
Use of network services
you can add this member to the conference
.
Repeat the above
Conference
49