Voice Dial; Flash Dial; During A Call - Philips Xenium 929 Owner's Manual

Voice dial

You can automatically dial a number by saying your correspondent's name.
In idle screen:
• To program a voice tag :
Names
In the
the Pilot Key
Follow the instructions displayed on the screen which invite you to say, then to repeat
the voice tag.
• To dial a number associated with a voice tag:
Press and hold the Pilot key, then say the voice tag of the number to dial.
If the phone recognises the voice tag, it repeats it then immediately dials the number
associated with it.
L
NOTES:
1. The duration of a voice tag is 2 seconds.
2. Up to 15 voice tags can be defined.

Flash dial

You can associate any of the keys
access, through a single long key press, to a frequently used phone number (see page 24). Key
and are defined and cannot be changed. (See page 41).
In idle screen:
• Press and hold a key between
The connection is established.
• After the call press
You can use your
number dialled (or name if the number is in the Names list), a second press on the same key
dials the number. The hotkey option is still available to redial the last number (see page 41).

During a call...

You can:
• Adjust the earpiece volume (see page 19)
• Mute or unmute the microphone (see page 19)
• Write a number in the notepad (see page 19)
• Consult the Names list (see page 20)
• Add a name to the Names list (see page 24)
• Write and send a message via the Names list or the Notepad (see page 24)
• Check a voice mailbox or access a voice server via the Notepad (see page 28)
• Make a second call (see page 47)
18
menu, select the Name you want to add a Voice dial to. Press
twice then select
to hang up.
as a redialling key, indeed, a first press on this key displays the last
Using your phone
Voice dial
to with a Names list entry to give you direct
and to dial the associated entry.
Add Voice tag?
then .