Activate/Deactivate The Silent Mode; Activate/Deactivate The Vibrator; Reading Your Gsm Phone Number - Philips Xenium 929 Owner's Manual

Activate/deactivate the silent mode

If you do not want your phone to ring when you receive a call, activate the silent ringer.
If you receive a call while the silent mode is activated, the
LED flashes quickly, and the display shows
In idle screen:
• Press , select the
move the Pilot Key to silent.
Press to confirm.
The ringer is deactivated. To reactivate the ringer, repeat the above sequence and select
the required volume.
L
NOTE
Silent mode can be assigned to a hotkey (see page 41)

Activate/deactivate the vibrator

If you have the Vibra battery and if you have set the function, your phone vibrates when you
receive an incoming call.
In idle screen:
• Press , select
Vibrator
.
Move the Pilot Key to select
Using the Vibra battery doesn't mute the ringer. If you want to mute it and keep only the
vibrator function active, set the quick setting
L
NOTES:
1. The Vibrator option is only available if a vibrating battery is installed (see batteries page 56).
2. The Vibra Setting is independent from the ringer. You can activate both at the same time.

Reading your GSM phone number

In idle screen:
• Press .
Names
• In the
Your phone number is displayed if it is present on your SIM card. If not, then enter the
number, then press
L
NOTE:
If your own number has been stored in the Names list, you can read it during a call. See "Consulting the
Names list". page 20.
Settings
Settings
. Select
On or
menu, move the Pilot Key until you reach
to save it.
Using your phone
Incoming call
Sounds
menu,
Sounds
(confirm) then select
Off and press to confirm.
Silence .
symbol flashes, the green
, but the phone does not ring.
Ringer volume
,
Own Number
and
.
21