Serial Number Plate And Date Codes - Gasboy atlas Service Manual

Model Information

Serial Number Plate and Date Codes

A two-letter date code is stamped on the serial number plate before the serial number. This
code shows the month and year of manufacture. For warranty purposes, refer to the date code
to determine the age of the equipment. The serial number plate is located on the "A" side at the
bottom of the unit attached to the inside of the frame.
Refer to the following tables to determine the date code on a Gasboy pump or dispenser:
A = January
B = February
C = March
D = April
P = 2005
R = 2006
S = 2007
T = 2008
Figure 1-3: Serial Number/Model Identification
For example: A serial number plate stamped "BP AT000199" contains the following
information:
• Date code [BP] - This unit was manufactured in B=February, P=2005.
• Serial Number [AT000199]
MDE-4334C Atlas Start-up and Service Manual · April 2008
Month Codes
E = May
F = June
G = July
H = August
Model Number
Serial Number
J = September
K = October
L = November
M = December
Year Codes
U = 2009
W = 2010
X = 2011
Y = 2012
Read this First
Page 1-7