Understanding The Power And Network Connection Options - Cisco SCH-VDS-I Reference Manual

Smart+connected video door station
Table of Contents

Advertisement

Table 1-3
Pre-Installation Requirements and Best Practices (continued)
Prerequisite
Determine the grounding requirements for the Cisco Video Door Station.
See the
"Grounding Requirements" section on page
The grounding requirements are different for the internal and external units.
Note
Use the contacts and relays for non-secure devices only. For example, don't use it for a secured electronic
gate. See the
"Security Best Practices" section on page
Determine whether you want a backlit button for the Cisco Video Door Station. The button's backlight can
be enabled or disabled in Composer Pro. You can also program the On/Off backlit button.
See the
Composer Pro User Guide
Before adding this device to a Composer Project
Make sure the wireless access point (WAP) is on the same network as your Controller and that the signal
is strong.
Determine the other Cisco touchscreens that will be communicating with this Cisco Video Door Station.

Understanding the Power and Network Connection Options

The Cisco Video Door Stations can use Ethernet or Wi-Fi network connection and can be powered using
Power over Ethernet (PoE), AC, or DC. We recommend using a wired network connection for the best
video intercom experience.
Refer to the following topics for more information:
Network Options
The Cisco Video Door Station can be connected using one of these network types:
We recommend using an Ethernet connection rather than Wi-Fi for the best communication with the
Note
Cisco Smart+Connected Residential system.
OL-27367-01
for details.
Network Options, page 7
Power Options, page 8
Connecting the Power and Network Cables, page 19
Standard Ethernet—(Recommended) Connect the Cisco Video Door Station to the RJ-45 LAN port
using the RJ-45 Ethernet cable.
Wi-Fi—The Wi-Fi antenna will communicate with the LAN's WAP. If the LAN has a WAP set up,
no additional wiring is needed except for power. See the
page 27
for details.
9.
34.
Cisco Smart+Connected Video Door Station Reference Guide
Prerequisites and Requirements
"Installing the Wi-Fi Antennas" section on
Prerequisite
Complete?
( )
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sch-vds-eSch-vds-bb

Table of Contents