Language; Registration - Philips ID9370B User Manual

EN

Language

Your ID9370 can support different display languages.
To change the language
m
1. Press
Language
:
2. Scroll
A validation tone is emitted and the screen returns to previous menu.

Registration

The procedures described below are the procedures that you will find in your ID9370 handset.
The procedures may vary according to the handset you want to register. In this case, please
refer to the manufacturer of the additional handset.
Additional handsets must be registered to the base unit before you can use them. Up to 6
handsets can be registered to one base station.
The Master PIN is required before you can register or unregister handsets. The default
PIN is 0000.
Register your ID9370
After charging it for a few minutes, the word WELCOME appears on a blue screen. Next, the
idle screen appears. Follow these steps to register your handset:
1. In idle mode, the message
prompted on the screen. Follow the screen instructions to start registration.
Enter PIN
2.
m
3. Press
All the handset keys (except the
process is completed.
10
Configure your ID9370
:
, scroll to
MENU
m
and press
SELECT
to your desired language and press
"Press Base page key for 3 secs. Press and hold
will be displayed on your screen. Enter the default Master PIN number - 0000.
to confirm your registration.
OK
m
Personal Set and press
.
m
SELECT
key) are deactivated until the above registration
m
, scroll
SELECT
to confirm.
m
:
to
" will be