Yamaha RX-V2500 Service Manual page 19

No DIAG MENU
12 AD DATA CHECK / FAN TEST
13 V CONV STATUS
14 IF STATUS
15 BUS CHECK
16 PROTECTION SET
17 SOFT SW
CHANGE SW BY EFFECT KEY
18 ROM VERSION / SUM / PORT
SUB MENU
1. PS (protection)
2. DC (protection) / FAN OUT
3. TH
4. REC-OUT
5. PL
6. K0 / K1 (panel key)
7. FAN DRIVE TEST: HIGH (Fan test only applies to models with a fan. /
8. FAN DRIVE TEST: MID (Fan test only applies to models with a fan. /
9. FAN DRIVE TEST: LOW (Fan test only applies to models with a fan. /
1. LOW BYTE DATA
2. HIGH BYTE DATA
1. IS 1
2. IS 2
3. CS 1
4. CS 2
5. CS 3
6. BS 1
7. BS 2
8. BS 3
9. BS 4
10. TI 1
11. TI 2
12. MTT
1. YSS930 BUS CHECK
2. SECOND DECODER BUS CHECK
3.YGV619 BUS CHECK
(Not applied to this model. /
このモデルには適用されません
1. SW MODE
2. MODEL SETTING
3. TUNER DESTINATION
4. TUNER EXIST
5. RDS EXIST
6. ZONE 2 EXIST
7. VIDEO FORMAT
1. VERSION (DSP ALL)
2. VERSION (OPERATION / GUI / DSP)
3. SUM (ALL / AFTER BOOT)
4. SUM (232C BOOT / MAKER BOOT)
5. SUM (CDDA BOOT / BIT MAP, FRONT)
6. SUM (WALL PAPER 1 / WALL PAPER 2)
7. SUM (PROGRAM)
8. PORT
9. AAC PORT
RX-V2500/DSP-AX2500
ファン装備モデルに適用
)
ファン装備モデルに適用
ファン装備モデルに適用
(5 Byte)
(3 Byte)
(5 Byte)
(5 Byte)
(4 Byte)
(5 Byte)
(5 Byte)
(5 Byte)
(3 Byte)
(5 Byte)
(1 Byte)
(5 Byte)
)
)
)
19