Epson SureColor F6200 series Settings Manual page 19

Adjust tank height
1. Make sure thickness-gauge(2.0mm) can be passed and
thickness-gauge(2.5mm) can't be passed
2. Check the vertical position
of Ink Tank
C A U T I O N
If it is not enough to hold/insert the Ink Tank,
please set this Ink Tank again.
Set Ink Tank again
SE Group Confidential (Related Staff Only) Until: Permanent
OK!!
NG!!
AGAIN at 2 locations
2.0mm => Can be Passed
2.5mm => Can't be Passed
3.Check the front and
rear position of Ink Tank.
C A U T I O N
If it is not enough to hold/insert the Ink Tank,
please set this Ink Tank again.
NG!!
Set Ink Tank again
(Black and Cyan).
OK!!
19