Burner Grates; Cleaning The Burner Grates; Cooktop Surface; Stainless Steel Surfaces - LG LSRG309ST Owner's Manual

Hide thumbs Also See for LSRG309ST:
Table of Contents

Advertisement

Available languages

Available languages

34
CARE AND CLEANING

Burner Grates

The range consists of three separate professional-style grates. For maximum stability, these grates should only be used when in
their proper position. The two side grates can be interchanged from left to right and front to back. The center grate can be
interchanged from front to back.
NOTE
Do not operate a burner for an extended period of time without cookware on the grate. The finish on the grate may chip with-
out cookware to absorb the heat.

Cleaning the Burner Grates

y Do not lift the grates out until they have cooled.
y Grates should be washed regularly and after spillovers.
y Wash the grates in hot, soapy water and rinse with
clean water.
y The grates are dishwasher safe.
y After cleaning the grates, let them dry completely and
securely position them over the burners.
CAUTION
DO NOT put the grate in the oven during self cleaning
mode.
side grate center grate side grate

Cooktop Surface

To avoid burns, do not clean the cooktop surface until it has
cooled. Foods with high acid or sugar content could cause a
dull spot if allowed to set. Wash and rinse when the surface
has cooled. For other spills such as oil/grease spattering, etc.,
wash with soap and water when the surface has cooled. Then
rinse and polish with a dry cloth.
NOTE
Do not lift the cooktop surface. Lifting the cooktop
surface can lead to damage and improper operation of the
range.

Stainless Steel Surfaces

To inquire about purchasing stainless steel appliance cleaner
or polish, or to find the location of a dealer nearest you,
please call our toll-free customer service number:
1-800-243-0000 or visit our website at: us.lgservice.com
NOTE
y Do not use a steel wool key; it will scratch the surface.
y To clean the stainless steel surface, use warm sudsy
water or a stainless steel cleaner or polish.
y Always wipe in the direction of the metal surface finish.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents