Activating/Deactivating An Alarm - Teac CRX23ABT User Manual

up mode (Radio or Buzzer), then click "Confirm "
Notes:

If radio is selected for wake up mode, the unit will play the last station selected.

AUX mode cannot be selected for wake up mode.

Activating/Deactivating an Alarm


When you have set an alarm with one of the wake up modes (Radio or Buzzer)
then the alarm is automatically activated and will sound at the set time. When
Alarm 1 and/or Alarm 2 are activated, this is indicated by the display showing
and/or

To check the set alarm time and mode, press the
button (for Alarm1) or the
while in standby mode. After about 5 seconds the display will switch back to the
clock display.

To deactivate a previously set alarm, enter the alarm setting mode, then press the
desired alarm icon(
following options (Buzzer Radio  nothing), then stop pressing any buttons for
5 seconds. The alarm icon (
display will switch back to clock display. The alarm clock has now been
in the top left corner.
and/or
and/or
Volume Up/Alarm 2 button (for Alarm 2) once
) . Keep pressing to cycle through the
) in the display will turn off and the
12
Volume Down/Alarm 1