Dismantling Instructions; Dismantling The Top Cover; Dismantling The Tray Covers; Release Tray Of Cd Loader - Philips CDR796 Service Manual

DISMANTLING INSTRUCTIONS

Dismantling the Top Cover

• Remove 7 (9) screws as shown in picture 2.
• Raise top cover at the rear and pull it backwards.
remark: in some production batches the top cover
may be fixed with 5 screws at the rear side.

Dismantling the Tray Covers

To dismantle the ornamental cover, the tray has to be moved out first.
This can either be done by activating the Open/Close-key or manually.
In order to avoid unnecessary loading it is recommended to move the tray out manually a few centimetres.
To release the tray manually proceed as shown in pictures 3, 4, 5 and 6. The tray will move out a little.
Afterwards it can be pulled out as far as convenient.

Release tray of CD Loader

picture 3
picture 4
detail
4-1
picture 2
Release tray of CDR module
picture 5
or
use a short screwdriver
or a paper clip
picture 6