Table of Contents
Advertisement
Enabling the Baby Monitor
14.10Enabling the Baby Monitor
When the baby monitor is enabled for a telephone, the tele-
phone automatically calls a previously specified telephone
number whenever the volume in the room reaches a defined
level. If the telephone is in the same room as your child, you
can use this function to monitor its sleep.
Enabling Baby Monitor
N
s4
<Level>
s
<Telephone num-
ber>
r
Q
Telephones on which baby monitoring is enabled can be
called internally (see
the room directly.
FRITZ!Box 7330
Pick up the handset or activate the speaker
phone function of your telephone.
We recommend using a device with a speaker
phone function.
Enables the baby monitor.
<Level>: Sound level at which a call is triggered.
Enter a numeral between 1 (the most sensitive
setting) and 8.
<Telephone number>: The telephone number to
be called. Enter an internal telephone number
93), the number 9 for an internal
(see
page
group call, or any external telephone number
desired.
Wait for the second-long acknowledgement
tone.
Do not hang up the handset!
The baby monitoring function is now enabled.
As soon as the volume in the room reaches the
specified level, the telephone will dial the tele-
phone number you entered. If you accept the
call, you are connected with the telephone
where the baby monitor is enabled.
A new call is initiated no less than one minute
after the previous call.
You can disable the baby monitor at any time by
hanging up the headset.
page
93) so that you can listen in on
92
Advertisement
Table of Contents
