Configuring The Internet Connection Over Lan 1: Fritz!Box As A Router - Fritz! 7330 Installation And Operation Manual

Configuring the Internet Connection over LAN 1: FRITZ!Box as a Router

4.
When the mobile communications function is used, the
FRITZ!Box user interface presents information about network
availability, connection status and throughput.
After this function has been set up, the "Internet / Mobile
Telephone Network" menu is always available, even when the
USB modem has been disconnected.
Due to technical limitations on the part of the mobile com-
munications network providers, some limitations may arise
for Internet telephone calls and for applications requiring an
incoming connection. The same is true for using port for-
warding, sharing USB storage memory, remote access via
HTTPS, dynamic DNS and VPN. Contact your network provider
for details on any restrictions that may apply.
7.5 Configuring the Internet Connection over LAN 1: FRITZ!Box as a
Router
You can use the FRITZ!Box at an already existing Internet ac-
cess via the "LAN 1" socket. For this the FRITZ!Box is not con-
nected to the router or network. For this kind of connection
the FRITZ!Box can be configured as an independent router or
as an IP client in the existing network.
Configuring FRITZ!Box as a Router
You can configure the FRITZ!Box to work as an independent
router to provide a network with its own network address
range.
1.
2.
3.
4.
FRITZ!Box 7330
Configure the settings for your Internet connection over
the mobile communications network. For more informa-
tion, see the Online Help of the FRITZ!Box.
Connect the FRITZ!Box to the router/network with a cable
as described in section
work on page 21.
Open the FRITZ!Box user interface.
Select the "Internet / Account Information" menu.
Select the "Existing connection over LAN" entry from the
"Internet Service Provider" drop-down list.
39
Connecting with a Router/Net-