Table of Contents
Advertisement
Setting Up Do Not Disturb
•
Setting Up a New Call Block
1.
2.
3.
4.
5.
6.
The call block is now set up.
14.8 Setting Up Do Not Disturb
In the FRITZ!Box night service you can set up a Do Not Disturb
function so that none of the connected telephones and other
terminal devices signal calls. At a time freely defined by the
user (for instance 11:00 p.m. – 6:00 a.m.) the terminal de-
vices then will be set as follows:
•
•
FRITZ!Box 7330
Blocking telephone numbers for incoming calls:
If a number has been blocked for incoming calls, the
FRITZ!Box will no longer accept any calls from this tele-
phone number. However, the FRITZ!Box can only recog-
nize a blocked telephone number if the caller allows
transmission of her or his telephone number.
You can also block all anonymous incoming calls, for
which the caller has suppressed transmission of the
telephone number.
Open the FRITZ!Box user interface (see
Select the "Telephony / Call Blocks" menu.
Click the "New Blocking Rule" button.
Select whether the call block is to apply to incoming or
outgoing calls.
Enter a range of numbers or a number.
Save the settings by clicking "OK".
Connected telephones will not ring.
This is not the case for IP telephones. It is not possible to
set up Do Not Disturb for IP telephones in the FRITZ!Box.
Connected fax and answering machines are disabled.
The Do Not Disturb setting has no effect on fax reception
or the answering machines integrated in the FRITZ!Box.
90
page
31).
Advertisement
Table of Contents
