Page 1
HOOD INSTALLATION, MAINTENANCE AND USAGE IDKG 9545 ETW...
Page 3
Part 1. Closed/absorber mode operation using carbon filters (with no connection to the ventilation duct) Part 2. Open/ventilating hood mode operation (connected to a ventilation duct)
Page 4
Part 3. A tag containing the serial number and technical data Part 4. Hood assembly...
Page 5
Part 5. Connecting the hood to the ventilation duct, when in open mode Part 6. Inserting or changing the carbon filters 1.Carbon filters are only used when operating in closed mode 2.Available as accessories Part 7. Hood operating panel...
Page 6
Part 8. Lighting exchange Part 9. For security reasons, you are advised to clean the aluminium filters (grease-absorbers) every three (3) months...
HOOD INSTALLATION, MAINTENANCE AND USAGE GENERAL INFORMATION Before installing and/or using the hood, you should read all of the following instructions carefully. Before installing the hood, make sure that the voltage (V) and frequency (Hz) given on the tag containing the serial number and technical data, which is placed inside the device, corresponds to the voltage and frequency in the place of installation.