Remote Dial-In User - Draytek VigorIPPBX 3510 User Manual

5 . 9 . 5 R e m o t e D
5 . 9 . 5 R e m o t e D
You can manage remote access by maintaining a table of remote user profile, so that users
can be authenticated to dial-in via ISDN or build the VPN connection. You may set
parameters including specified connection peer ID, connection type (ISDN Dial-In
connection, VPN connection - including PPTP, IPSec Tunnel, and L2TP by itself or over
IPSec) and corresponding security methods, etc.
The router provides 32 access accounts for dial-in users. Besides, you can extend the user
accounts to the RADIUS server through the built-in RADIUS client function. The following
figure shows the summary table.
Set to Factory Default
Index
User
Status
Click each index to edit one remote user profile. Each Dial-In Type requires you to fill the
different corresponding fields on the right. If the fields gray out, it means you may leave it
untouched. The following explanation will guide you to fill all the necessary fields.
VigorIPPBX 3510 Series User's Guide
i a l - i n U s e r
i a l - i n U s e r
Click to clear all indexes.
Click the number below Index to access into the setting page
of Remote Dial-in User.
Display the username for the specific dial-in user of the
LAN-to-LAN profile. The symbol ??? represents that the
profile is empty.
Display the access state of the specific dial-in user. The
symbol V and X represent the specific dial-in user to be active
and inactive, respectively.
174