Draytek VigorIPPBX 3510 User Manual page 164

Hide thumbs Also See for VigorIPPBX 3510:
Table of Contents

Advertisement

WAN Inbound Bandwidth It allows you to set the connecting rate of data input for WAN.
WAN Outbound Bandwidth It allows you to set the connecting rate of data output for
Note: The rate of outbound/inbound must be smaller than the real bandwidth to ensure
correct calculation of QoS. It is suggested to set the bandwidth value for inbound/outbound
as 80% - 85% of physical network speed provided by ISP to maximize the QoS
performance.
Reserved Bandwidth Ratio It is reserved for the group index in the form of ratio of
Enable UDP Bandwidth
Control
Outbound TCP ACK
Prioritize
Limited_bandwidth Ratio
E
E
d
d
i
i
t
t
t
t
h
h
The first three (Class 1 to Class 3) class rules can be adjusted for your necessity. To add, edit
or delete the class rule, please click the Edit link of that one.
After you click the Edit link, you will see the following page. Now you can define the name
for that Class. In this case, "Test" is used as the name of Class Index #1.
VigorIPPBX 3510 Series User's Guide
BOTH- apply to both incoming and outgoing traffic.
Check this box and click OK, then click Setup link again.
You will see the Online Statistics link appearing on this page.
For example, if the connection supports 1M of downstream
and 256K upstream, please set 10000kbps for this box. The
default value is 10000kbps.
WAN. For example, if the connection supports 1M of
downstream and 256K upstream, please set 256kbps for this
box. The default value is 10000kbps.
reserved bandwidth to upstream speed and reserved
bandwidth to downstream speed.
Check this and set the limited bandwidth ratio on the right
field. This is a protection of TCP application traffic since
UDP application traffic such as streaming video will exhaust
lots of bandwidth.
For the download speed might be impacted by the uploading
TCP ACK, you can check this box to push ACK of upload
faster to speed the network traffic.
The ratio typed here is reserved for limited bandwidth of UDP
application.
e
e
C
C
l
l
a
a
s
s
s
s
R
R
u
u
l
l
e
e
f
f
o
o
r
r
Q
Q
o
o
S
S
156

Advertisement

Table of Contents
loading

Table of Contents