Subscribe to Our Youtube Channel
Related Manuals for Broncolor Siros
Summary of Contents for Broncolor Siros
- Page 1 Siros Operating instructions | Bedienungsanleitung | Mode d‘emploi Bron Elektronik AG CH – 4123 Allschwil / Switzerland www.bron.ch...
- Page 2 Controls and displays Bedienungs- und Anzeigeelemente Eléments de commande et d‘affichage Rotary controller Drehregler Bouton de réglage Digital power distribution display Leuchtzifferanzeige für Blitzenergieverteilung Affichage numérique de l’énergie d’éclair Modelling light on / off Einstelllicht ein / aus Lumière de mise au point marche / arrêt “test”...
-
Page 4: Table Of Contents
OPERATING INSTRUCTIONS | BRONCOLOR SIROS Before use Thank you for choosing broncolor Siros, which is a high-quality product in every respect. If used properly, it will give you many years of good service. Please read all the information contained in these operating instructions carefully. -
Page 5: Important Safety Instructions
10 minutes for cooling before replacing a halogen lamp or the flash tube! must be replaced! > broncolor flash systems should only be used with original broncolor flash tubes, original broncolor > The unit must only be connected to an earthed socket, or an emergency power generator! bulbs and fuses, original broncolor accessories, and original broncolor spare parts. -
Page 6: Scope Of Supply
Siros 400 S – 31.623.XX Siros 800 S – 31.643.XX connected units. > When using Siros in conjunction with a stand, use a sandbag if the stand is extended more than 2 Check that all the following items have been delivered: metres. Siros monolight... -
Page 7: First Start-Up
FIRST START-UP CONTROL ELEMENTS 1. Remove protective cover 2. Plug in mains cable Element Function Rotary controller (1) Switches the unit on and off (stand-by mode). Pressing on the rotary controller for 3 s switches the unit to stand-by. In menu: menu navigation and confirmation of menu speed full cell... -
Page 8: Overview Of Main Menu Functions
"ce", photocell and radio "all" or only sync cable "--") MENU NAVIGATION Overview of menu functions Siros 400 / 800 Siros 400 / 800 Siros 400 S / 800 S WiFi / RFS 2 WiFi / RFS 2 speed • WiFi •... -
Page 9: Controlling Flash Times
RELEASE RFS 2 module (radio frequency system) With Siros, you can control the flash time in two different ways: For RFS 2 flash control, the channel (studio address) must correspond to the transmitter’s chan- Controlling flash time using the "speed" setting in the main menu nel. -
Page 10: Special Functions
For control of your Siros monolight, you can download the "bronControl" app. To find the app, blue on leaving the menu. -
Page 11: Faqs
10. FAQ 10.1 Changing flash tubes 10.3 Changing light shapers 1) Disconnect the mains cable from the unit. 1) Turn the light shaper in either direction to its stop. 2) Remove the safety glass by pulling it out of its retaining clips. 2) Pull the release backwards and, at the same time, turn the light shaper until it is free of the 3) Press the contact spring downwards and pull the flash tube out carefully. -
Page 12: Accessories
However should a fault occur please do not try to open the unit and repair it yourself. Even when the unit is switched off there may still be dangerous voltages in- side it. Therefore, for maintenance and repairs always send the unit to your broncolor service point. 33.115.00 Standard reflector L40 34.260.00... -
Page 13: Technical Data
Halogen max. 300 W / 120 V, adjustable: off, full or proportional to flash energy Flash triggering Manual release button, photocell, sync cable, with a built-in broncolor RFS 2 receiver Remote control With bronControl app for mobile devices (only devices with a built-in WiFi module) RFS 2.1 / 2.2 transmitter (only with built-in RFS 2 receiver) - Page 14 Halogen max. 300 W / 120 V, adjustable: off, full or proportional to flash energy Flash triggering Manual release button, photocell, sync cable, with a built-in broncolor RFS 2 receiver Remote control With bronControl app for mobile devices (only devices with a built-in WiFi module) RFS 2.1 / 2.2 transmitter (only with built-in RFS 2 receiver)
Need help?
Do you have a question about the Siros and is the answer not in the manual?
Questions and answers