Pioneer MVH-X585BT Owner's Manual page 18

Menu Item
DOT DISPLAY
[SPEANA], [ICON]
AUTO PI
[ON], [OFF]
AUX
[ON], [OFF]
BT AUDIO
[ON], [OFF]
PANDORA
[ON], [OFF]
SPOTIFY
[ON], [OFF]
BT MEM CLEAR
[YES], [CANCEL]
PHONE CONNECT
[IPHONE/IPOD], [ANDROID]
18
En
Description
Select [SPEANA] or [ICON] to appear on the left
side of the display.
Search for a different station with the same
programming, even if using a preset station.
Set to [ON] when using an auxiliary device
connected to the unit.
Set the Bluetooth signal on/off.
Set to [ON] when using the Pandora function.
Set to [ON] when using the Spotify function.
Clear the Bluetooth device data (device list, PIN
code, call history, phone book, preset phone
numbers) stored in the unit.
[CLEARED] appears when data is successfully
deleted.
Select the type of device ([IPHONE/IPOD] or
[ANDROID]) and the appropriate connection
method ([WIRED] or [BLUETOOTH]) according to
your device.
• When [BLUETOOTH] is selected, USB
connections cannot be made regardless of the
current Bluetooth connection to the unit.
• Select [ANDROID] when you connect the
mobile device other than iPhone or Android.
• When the setting is changed, [USB AUTO]
(page 18) is automatically performed if [USB
AUTO] is set to [ON].
Menu Item
ANDROID WIRED
[MEMORY], [APP CONTROL]
P.APP AUTO ON
[ON], [OFF]
S.REMOTE*1*2
[OFF], [PIONEER], [PRESET]
USB AUTO
[ON], [OFF]
*1 Depending on your car, this function may not work properly. In this case, contact your dealer or an
authorized PIONEER Service Station.
*2 Please use a commercially available wiring harness for each car model when [PRESET] mode is
engaged, and use a commercially available adapter when in [PIONEER].
Description
Select the appropriate connection method for an
Android device.
• This setting is not available when [BLUETOOTH]
is selected in [PHONE CONNECT].
Select [ON] to automatically launch Pioneer ARC
APP when an Android device is connected to the
unit via AOA. (Not available when [MEMORY] is
selected in [ANDROID WIRED].)
Select [PIONEER] or [PRESET] according to your
wired remote control.
Select [ON] to automatically switch to [USB]
source when a USB device/iPod is connected to
the unit.
Select [OFF] when a USB device/iPod is being
connected to the unit just for charging.