Audio Settings - Pioneer MVH-X585BT Owner's Manual

Menu Item
NEWS
[ON], [OFF]
ALARM
[ON], [OFF]
SEEK
[MAN], [PCH]
SAVE
UNSAVE
SEL DEVICE
iPod
S.RTRV
USB iPod
[1] (effective for low compression
rates),
[2] (effective for high
compression rates),
[OFF]
AUDIO BOOK
iPod
[FASTER], [NORMAL], [SLOWER]
BOOKMARK
NEW STATION
[FROM TRACK], [FROM ARTIST]
16
En
Description
Interrupt the currently selected source with
news programs. (Available only when FM band is
selected.)
Interrupt the currently selected source with
emergency announcements. Select [OFF] to
disable this function.
Assign or buttons to seek the stations
one by one (manual tuning) or select a station
from the preset channels.
Store the information about the song currently
being played to your music list on Spotify.
Remove the song information stored in [SAVE].
Connect a Bluetooth device in the list.
Enhance compressed audio and restore rich
sound.
Change the playback speed. (Not available when
[CONTROL iPod] is selected in the control mode.)
Store the track information currently being
played in your Pandora account.
Create a new station based on the track or artist
currently being played.
Menu Item
PAUSE
PLAY
STOP

AUDIO settings

Menu Item
EQ SETTING
[SUPER BASS], [POWERFUL],
[NATURAL], [VOCAL], [CUSTOM1],
[CUSTOM2], [FLAT]
Select an equalizer band and
level for further customizing.
Equalizer band: [50HZ] to
[12.5kHZ]
Equalizer level: [–6] to [+6]
FADER*1 (Only for standard mode)
AUX
BALANCE
SUBWOOFER
[ON], [OFF]
SUBWOOFER*2
[NOR], [REV]
SPEAKER LEVEL
Network mode: [HIGH L], [HIGH
R], [MID L], [MID R], [SUBWOOFER]
Standard mode: [FRONT L],
[FRONT R], [REAR L], [REAR R],
[SUBWOOFER]
Output level: [–24] to [10]
Description
Pause or resume playback.
Start playback.
Stop playback.
Description
Select or customize the equalizer curve.
• When you select a setting other than
[CUSTOM1] and [CUSTOM2], you can also
customize the equalizer curve by pressing and
holding the M.C. dial, then store the
customized equalizer curve in [CUSTOM1].
Adjust the front and rear speaker balance.
Adjust the left and right speaker balance.
Set to [ON] when using a subwoofer speaker.
Select the subwoofer phase.
Select a speaker unit (filter) and adjust the
output level.
• Each value you have adjusted changes when
you change the [POSITION] setting (page 17).