Power Switch - Panasonic MC-E7305 Service Manual

5.5. Removing cord rewind /
switch pedals
1. Insert the minus screwdriver into the hinge area
(clearance between pedal and upper body) of the pedal
and pry off for removal. (Fig. 11)
Cord rewind
pedal
2. When the pedals are removed, the springs are also
removed together. (Fig. 12)
Pedal
Spring
MC-E7305 / MC-E7305K / MC-E7303 / MC-E7303K / MC-E7302 / MC-E7301 / MC-E7301K
5.6. Removing/replacing

power switch

1. Using the minus screwdriver or similar, expand the upper
body's hook which fastens the power switch. (Fig. 13)
Switch pedal
Fig. 11
2. Disconnect the stopper-provided faston terminal from the
switch and replace the power switch.
3. Connect the removed lead wires to the switch tabs and
reinstall in its lodging. (Fig. 14)
Fig. 12
NOTE: Maker sure the lead wires and lower body seal
are correctly positioned to avoid pinching them
between parts.
10
Power switch
Fig. 13
Power switch
Fig. 14